Early preview: draft and save prompts. AI rendering and payments are coming later.
shotmelo.
My drafts
All guidesFOCUS PLANNING · OCTOBER 31, 2026

AI video focus prompts: decide what should be sharp

Name the subject that should be sharp first. For a rack focus, name a second subject at a different depth and describe the handover in order. Decide what should stay still so you can distinguish a focus change from a zoom, a camera move or a cut. These words describe an intended result; they do not activate a guaranteed focus control.

1. Separate sharpness from camera movement

Shallow focus isolates a limited depth range. Deep focus keeps more of the scene readable. A rack focus changes which depth receives attention during one shot. A zoom changes framing instead; moving the camera changes the view through the scene. You can combine these choices, but separating them makes a first trial easier to judge.

Runway's camera terminology guide illustrates focus vocabulary with Gen-4.5 text-to-video examples. Its terminology helps describe the result, without establishing that every model or input mode follows the same instruction.

On a small screen, scroll the table sideways to compare the choices.

Choose the visible result before the camera vocabulary
GoalWhat you ask to seeWhat to avoid confusing it with
Hold shallow focusOne named subject stays sharp while a different depth stays softerA hazy treatment over the entire image
Keep deeper focusThe required near and far subjects remain readable togetherA request to blur the background that contains the second required subject
Rack focusSharpness passes from the first target to the second within the shotA cut, a zoom-in, or replacing one object with another
Soft-focus lookA deliberately diffused or hazy appearanceA clear subject with only its background out of focus

Google Cloud's video prompt guide likewise distinguishes shallow and deep depth of field from a rack focus. In your brief, describe the named object that should be readable. Lens and aperture language can express a look, but writing a number does not prove the output follows a physical camera calculation.

2. Copy a focus handover card

Choose two targets that can be seen in the same frame at different depths. Give each a plain name and position. For the first comparison, keep the camera and objects still so the intended change is easy to separate from movement or a new composition.

Scene and camera view:
Near target and required visible detail:
Far target and required visible detail:
Opening: which target is sharp, which is softer:
Handover: direction and intended pace of the focus change:
Ending: which target is sharp and how the shot settles:
Allowed subject/camera movement:
Reference file, model/mode and exact prompt:
Accepted / rejected, with the observed reason:

An original planning scene for this card places a red thread spool near the camera and a blue ceramic bird farther back on the same table. Both objects remain visible. The table below describes the intended handover; it is not a sequence of generated frames.

The three phases describe a review plan, not precise time controls.

A focus change to inspect through the whole take
PhaseNear red spoolFar blue birdKeep checking
OpeningSharp enough to read the thread textureVisible but softerBoth objects have distinct positions and shapes
HandoverBecomes softerBecomes sharperThe view continues without an edit or object substitution
EndingRemains softerHolds the viewer's attentionThe transition settles instead of repeatedly hunting back and forth

3. Adapt these original prompt drafts

These examples have not been rendered or benchmarked. Use them as starting briefs, check the chosen service's current input controls, and judge its actual output rather than treating the wording as a tested recipe.

Hold attention on the near subject

Fixed view of a red thread spool near the left side of the camera and a blue ceramic bird farther back on a plain table. The red spool stays sharply defined while the bird remains softly out of focus. One loose thread end sways gently. The objects keep their positions and the framing remains steady.

Here, the small thread movement supplies an action while the intended focus stays on the spool. If the bird must be inspected too, change the goal to keeping both objects readable rather than also asking for a strongly blurred background.

Pass attention from near to far

Fixed view of a red thread spool in the near foreground and a blue ceramic bird farther back on the table. Begin with the spool sharp and the bird soft. The focus gradually shifts from the spool to the bird: the thread texture softens as the bird becomes clear. End by holding focus on the bird. Both objects remain in their places and the camera view stays steady throughout the continuous shot.

A rack focus is the requested action in this version. If the model instead cuts to a close-up of the bird, it has reached a similar subject emphasis through a different result. Record that difference rather than calling it a successful focus pull.

Shorten the brief for an approved image input

The focus gradually passes from the near red spool to the blue bird behind it, then settles on the bird. The objects stay in place and the camera view remains steady.

Use this only with an actual reference that contains the intended subjects and depth arrangement, selected through a supported image input. The shorter wording describes the change; it does not attach a file or create a focus-setting feature. Keep any mandatory timing in the acceptance card and inspect the take against it.

4. Check what your reference can establish

Before image-to-video, look at both targets. Is the intended sharp subject already readable? Is the second object recognizable and separated from the first? If they overlap or occupy the same apparent depth, the handover may be difficult to judge even if the image looks attractive.

A heavily blurred object contains limited visible detail. A generated refocus can invent a plausible appearance; it does not verify the original details hidden in that blur. If an exact product shape, label or identity matters, prepare an approved source that shows it clearly. Additional reference inputs only help when the selected model and mode actually support their intended role.

Keep focus separate from the lighting plan and the camera movement. Change one part of the brief at a time so you can see whether a new result changed the focus target, the illumination, or the composition.

5. Inspect the export, not just the opening thumbnail

  1. Opening: check that the named starting target is the sharp one and the other target is already present.
  2. Transition: watch the whole handover for a cut, a changing object, unwanted reframing or repeated focus shifts.
  3. Ending: check that the final target stays readable long enough for your intended use.
  4. Detail: review the required material or identity, separately from whether a blur effect looks convincing.

Motion blur from movement and a subject being out of focus are different observations. Do not label every soft frame a focus error. Note what was moving, what became soft, and whether the planned target was ever readable. Keep rejected outputs or notes alongside the exact prompt so the next attempt has a specific question to answer.

Set a useful stopping rule

If a focus handover repeatedly fails, simplify the scene before adding more camera jargon. For precise delivery, choose a documented control or editing workflow, or use separate accepted shots with an intentional edit. That edit can serve the story, but it is a different technique from a continuous rack focus.

Shotmelo currently helps organize manual image and motion briefs, preview a local reference, and save or export text drafts. It does not calculate scene depth, control a model's focus, restore blurred detail or render video. Paste the focus card into your editable brief and use your selected generation service for the actual take.

Draft my focus briefPlan reference motion

Published October 31, 2026. Official focus terminology checked on that date. Original card and prompts are planning examples; no paid rendering tests, model rankings or guaranteed focus behavior.