AI video storyboard template: plan the sequence before the clips.
Give each shot a picture, a purpose, one action, and a place in the edit. The template below turns a short idea into three planned clips without asking a single prompt to manage the whole sequence. Copy the blank shot card, sketch the opening frame, then write only the instructions your selected generator needs.
1. Give the picture and the production notes different jobs
A storyboard shows the order and composition of your shots. A shot list names the clips you need to make. A generation prompt describes what happens inside one of those clips. Keep all three linked by a shot ID; keep the editor's instructions out of the model-facing text.
Adobe's storyboarding guide explains visual planning, while its shot-list guide covers numbered shots, framing, movement, and the coverage an editor needs. The AI-specific cards here are our own adaptation: they add reference inputs, model controls, and accepted-take notes to that planning process.
“A blue paper pinwheel rests on a windowsill, turns in a breeze, then settles.” Each shot should contribute something visible to that story.
2. A three-panel AI video storyboard example
These original sketches and prompts are planning examples, not generated or tested results. The timing adds up to a proposed ten-second edit; it does not specify a provider's available clip lengths. Prepare real reference images separately if you choose image-to-video.
Shot 01 — establish the place · about 3 seconds in the edit
Panel: a wide view places the blue pinwheel on the sill. Purpose: show where the action will happen. Ending: hold a usable still moment before the closer shot.
A blue paper pinwheel stands upright on a windowsill in soft daylight. The pinwheel stays still. The camera holds a fixed wide view.
Shot 02 — show the change · about 4 seconds in the edit
Panel: a closer view keeps the pinwheel centered; the arrow describes its intended rotation, not camera movement. Purpose: make the breeze visible through one action. Ending: retain a clear frame for the next cut.
The blue paper pinwheel turns slowly on its upright wooden stick. Soft daylight remains steady. The camera holds a fixed medium view.
Shot 03 — resolve the action · about 3 seconds in the edit
Panel: use the same medium composition to hold the ending. Purpose: let the action finish. Opening: begin with a matching turning pinwheel, then select the portion that settles cleanly.
The blue paper pinwheel slows gently, comes to rest, and holds still on its upright wooden stick. The camera holds a fixed medium view in soft daylight.
For an image-conditioned mode, let the approved image establish the object and composition; adapt the text toward the motion that mode needs. These longer descriptions are readable planning briefs, not universal syntax. If a single accepted clip already supplies the turn and the settling, use it across shots 02 and 03 in the edit instead of generating another clip just to fill a row.
3. Copy this blank shot-card template
Duplicate one card per planned shot. Draw a small panel in the opening field, or attach your own sketch in the document where you keep the cards. A file label helps you organize an asset; it is not a command that every video model understands.
SEQUENCE Story in one sentence: Delivery frame / aspect ratio: SHOT ID: Job in the story: Opening panel: [draw or attach a sketch] Approved reference file, if needed: Subject and one main action: Framing and camera movement: Desired ending / next cut: Target time in the edit: Audio / caption notes for the editor: GENERATION SETUP Provider, model, and mode: Actual input controls available: Model-facing motion prompt: TAKE REVIEW Accepted take / file label: Usable start and end points: Observed problem, if any: One change for the next attempt:
For shot 02 above, the job is “show the breeze,” the camera is fixed, and the intended action is slow rotation. “Cut after four seconds” stays in the edit notes. “Use shot 01's exact pinwheel” needs an actual supported reference workflow; writing the file name in a prompt does not establish one.
4. Make the clips in a sequence you can assemble
- Read the panels without the prompts. Check whether the opening, change, and ending communicate the idea. Remove shots that add nothing.
- Prepare the references and frame. Choose the delivery crop, then make each opening image match its panel. Use the aspect-ratio guide before cropping away the action.
- Check the exact generation mode. Record whether it accepts an opening image, an ending image, other references, or just text. Use only the controls actually available.
- Work on one planned scene at a time. Review the clip before adding complexity. Keep the next shot's cut and timing in your editing document.
- Assemble the usable portions. Choose the last usable frame of one clip and the first usable frame of the next. Trim to tell the story, then add any sound or captions in your editor.
The Runway Gen-4 video prompting guide recommends simple prompts and treating a generation as a single scene. That is Gen-4 guidance, checked October 14, 2026. Other models may offer different sequence controls; check their current documentation before using a multi-shot prompt or assuming a reference feature exists.
5. Review the cut, then revise the cause
| Observed problem | Check first | Next planning action |
|---|---|---|
| The story is unclear. | Whether each panel has a distinct job. | Rewrite the sequence or replace the missing shot before rewording every prompt. |
| The pinwheel jumps between cuts. | Position, scale, light, and rotation at the chosen cut points. | Try a better trim; if none works, revise the next opening reference or framing. |
| The action finishes too early. | The accepted take's usable section. | Shorten its time in the edit or request a simpler, slower action within the supported controls. |
| The object changes shape. | The reference and the affected clip, frame by frame. | Revise that clip and its inputs; a storyboard alone cannot enforce object identity. |
For sequences with a person, add the character continuity card to the shot IDs. If the movement is confusing, use the camera movement guide to distinguish movement of the camera from movement of the subject. Revise one observed cause, then compare the same cut again.
Common AI video storyboard questions
Is a storyboard the same as a shot list?
No. The storyboard visualizes the sequence; the shot list tracks the clips and instructions needed to make it. Matching IDs let you move between them.
Do I need finished artwork for each panel?
No. A rough sketch can establish composition and action. It is a planning aid. If your generator needs an input image, prepare a suitable actual image separately rather than assuming the sketch is an approved source frame.
Can I paste the whole template into a video generator?
Keep the card as your production record. Paste the model-facing prompt into the relevant field and supply assets through the mode's documented controls. Shot IDs, edit times, and review notes belong in your plan.
Does Shotmelo render these clips or create storyboard images?
The current Shotmelo preview provides local prompt editing, draft saving, reference preview, and text export. It does not connect AI image or video rendering, accounts, or payments. You can organize a motion brief here and create the actual assets in your chosen tools.
Use the card to decide the action and framing first. Then edit and save the text in the Shotmelo planning workspace.