How to extend an AI video without losing track of the join.
First check whether your selected service offers a video-extension mode. If it does not, you can try exporting the ending frame of an approved clip, using that image to start a new generation, and joining the two clips in an editor. Review the movement across that boundary before making another segment.
More running time is not always more action. A held frame, slower playback, a wider canvas, and newly generated footage produce different results. Choose the one your edit needs. This guide focuses on moving forward from an existing clip; for a repeated return to the opening, see the loop planning guide.
1. Choose the input your workflow actually accepts
On a small screen, scroll the table sideways.
| Method | What you supply | What to confirm |
|---|---|---|
| Native video extension | An accepted source video and a continuation request. | The selected model and mode support it; whether the result includes the original clip or only the addition. |
| Last frame → new image-to-video clip | A frame exported from the accepted ending, plus the next motion brief. | You will need to join the clips and review their movement at the cut. |
| Editing the existing footage | The current clip in a video editor. | A hold, speed change, or a separate shot serves the story without needing newly generated action. |
Google Cloud's Extend videos documentation is one example of a dedicated extension workflow: it describes a Video extension task with an input video and a selected supported model. That does not establish support in every app using the same model family. Check your own route's accepted files, limits, and output behavior before submitting a generation.
Runway's current image-to-video prompting guide describes another approach: extract the last frame of a completed generation, use it as the image input for a new video, then combine the clips in an editor. A still image can show the ending composition, but it cannot by itself show the movement that led into that frame.
2. Approve the boundary before exporting a frame
Play the completed source clip and decide where you want to continue. Inspect that point for a subject changing shape, an unwanted cut, a sudden camera move, or something leaving the view. An ending you would reject in the edit is a poor definition of the next opening.
If the final part is unusable, choose an earlier clean point and trim the accepted source clip to it. Export the frame from that same point. Using an earlier image while keeping all of the original footage would ask the second clip to restart from a state the first clip has already passed.
- Keep the original file and save the trimmed version separately.
- Use a frame-export or current-frame control when available; exclude player buttons and interface borders from the image.
- Preserve the intended crop and inspect the exported image at its actual size.
- Check that important subjects and objects remain recognizable and visible enough for the next action.
For a last-frame continuation, assign the exported image to the new clip's starting-image control. This is different from asking one generation to connect two chosen images. Use the first and last frame guide if you also need a particular ending image for that new clip.
3. Describe what happens after the accepted ending
Imagine a white paper boat drifting through a shallow stream past a gray stone. The camera holds a fixed view. These are original, unrendered planning examples: no source clip or exported frame has been supplied or tested. Adapt the scene notes to what your actual footage shows.
Clip A: an initial motion brief
The white paper boat drifts steadily downstream toward the gray stone. Small ripples move around its folded hull. The camera holds a fixed view of the shallow stream. The shot ends with the boat still visible beside the stone.
Approve the actual result before carrying it forward. Suppose the chosen ending shows the boat beside the stone, pointing toward open water on the right. Write down that observed state. If the real ending places the boat elsewhere, revise the continuation rather than pretending the planned ending happened.
Clip B: a continuation from that frame
The white paper boat continues drifting downstream from its current position, passes the gray stone, and moves toward the open water on the right. Small ripples follow the boat. The camera holds its fixed view of the stream.
This draft asks for the next part of the movement. Reusing all of clip A's action could ask the boat to approach the stone again. Words such as “continues” express an intention; judge whether the new clip actually begins with a compatible direction and pace.
Source: [accepted clip and chosen end point]. Frame: [exported image]. Current state: one white paper boat beside the gray stone, pointing toward the right. Next change: pass the stone and continue into open water. Preserve for review: boat folds, stone position, crop, camera view, light, and travel direction.
The note is for your records, not special model syntax. For a moving camera, also record what the view is doing at the boundary. A matching image does not guarantee the next camera move will inherit the previous one. The camera movement guide can help you name that movement precisely.
4. Judge the join on a timeline
Put the accepted first clip and the continuation next to each other in an editor. Check the order and whether an extension output already contains the source footage; avoid accidentally adding that footage twice. Play across the boundary at normal speed, then inspect it frame by frame.
- Appearance: does the boat keep its folds and size, and does the stone stay in place?
- Motion: does travel continue, or does the boat pause, jump, accelerate, or reverse?
- View: compare crop, horizon, camera direction, light, and background placement.
- Timing: look for an extra hold around the shared frame. Trim or adjust the join if that hold is visible.
- Sound: listen across the cut if either clip has audio. Plan the sound in the edit rather than assuming a still image carries it forward.
Runway's guide specifically notes adjusting timing and removing the shared frame when combining its last-frame continuation clips. Check the actual files in your workflow; do not apply a fixed trimming rule without looking at the join. A matching boundary picture alone is not proof of a seamless moving sequence.
Export a review copy in the intended aspect ratio and frame rate, then play that file too. An editor preview and a final export can reveal different timing or framing problems. Use the framing guide if the delivery crop removes space the boat needs to move through.
5. Keep an accepted chain, not just the newest result
Save each approved segment, its source frame, the prompt, selected model and input mode, relevant settings, and a short acceptance note. Record the exact boundary that needs work when a continuation fails. Review the assembled sequence from the beginning before adding another segment, so an unnoticed change does not become the next reference.
If repeated attempts drift away from the approved scene, return to a clean accepted point, simplify the next action, or plan a cut to a new shot. A cut can be the right storytelling choice. It is not evidence that a continuous extension succeeded. Use a storyboard card to record the new shot before generating more footage.
Shotmelo's image-to-video prompt planner can help you edit a motion brief, save a local draft, and export its text. Its current preview uses manual templates; it does not read a video's ending, extract frames, extend clips, render footage, or join videos. Prepare and check the continuation in the video service and editor you choose.